AHU, HRU & Fan Planned Preventative Maintenance

Our maintenance inspections are designed to identify deterioration and potential failures before they result in system downtime or loss of performance.

›

›

AHU, HRU & Fan Planned Preventative Maintenance
H&V_Service_AHU_HRU_Fan_Planned_Preventative_Maintenance

About the service

Our maintenance inspections are designed to identify deterioration and potential failures before they result in system downtime or loss of performance. Regular planned maintenance is fundamental to maintaining the reliability, efficiency and performance of mechanical ventilation equipment. Where appropriate, maintenance programmes can be developed with reference to SFG20, the recognised industry standard for building maintenance specification. SFG20 provides maintenance task schedules covering heating, cooling, ventilation, plant and other building services, supported by technical and legislative references.
We provide PPM services for
Air Handling Units
Heat Recovery Units
Supply and extract fans
Associated motors and drives
Filters
Dampers and actuators
Belts and pulleys
Controls and associated components
About Our Process
We can provide support throughout the commissioning and handover process. Our procedures are designed to ensure that works are properly planned, recorded and reported, providing clients with confidence in the results obtained. The objective is to provide documentation that remains useful to the building owner and facilities management team throughout the operational life of the installation.
1
Planning
Establishing the scope of testing, required documentation, programme and access requirements before works commence.
2
Inspection
Reviewing installations and identifying issues that may prevent successful testing or commissioning.
3
Testing
Carrying out functional and performance testing using appropriate calibrated instrumentation and agreed procedures such as test sheets, inspection records, remedial recommendations and more.
4
Verification
Reviewing results against the applicable design criteria, specifications, standards and system requirements.
5
Remedial Support
Providing clear information regarding defects or performance issues so that remedial works can be effectively targeted.
6
Re-Testing
Returning to site where required to verify that identified issues have been rectified and that the system subsequently achieves the required performance.
7
Documentation
Providing clear records of testing and verification to support project completion, handover and future maintenance.
8
Quality Assurance
Quality and traceability are fundamental to effective testing and commissioning.

Explore Our Commissioning Services​

From clean air validation to fire damper operational testing. Discover the specialist services we deliver nationwide.

H&V_Service_AHU_HRU_Fan_Planned_Preventative_Maintenance

AHU, HRU & Fan Planned Preventative Maintenance

Our maintenance inspections are designed to identify deterioration and potential failures before they result in system downtime or loss of performance.

H&V_Service_Fire_and_Smoke_Control_Systems

Fire & Smoke Control Systems

Fire and smoke control systems are critical life and safety.

H&V_Service_Maintenance_Compliance_and_PPM_Testing

Maintenance Compliance & PPM Testing

We provide specialist testing and specialist building services systems.

Fire damper installed within a commercial ventilation system

Fire Damper

Annual fire damper testing, surveys, and remedial works across Scotland and beyond, always.

Water flowing through a commercial water treatment system

Water Hygiene & Water Treatment

Expert in-house pre-commission cleaning and pipework sterilisation services for lasting, trusted results always.

HVAC engineer inspecting ventilation ductwork during commissioning

HVAC Commissioning​

Scotland’s largest team of qualified engineers delivering precise HVAC commissioning services.